Midland 98+ - No startup beeps

General CB Radio Advice and Troubleshooting

Post Reply
daemonchild
Good Buddy
Good Buddy
Posts: 18
Joined: Tue Dec 23, 2008 4:14 pm

Hi,

Why does my three week old midland 98+ sometimes 'start up' perfectly and sometimes just sit there with no display?
Could this be damp? or a less than perfect powerfeed?

For example, I tried it in my old mini (engine running) - no display.
And then I tried it in my peugeot 307, engine off - perfect.

Or is this a red herring and does it go back for replacement??

Cheers.
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

sounds like power supply

:D :D :D *King* *King* *King*
if it anit broke dont fix it
daemonchild
Good Buddy
Good Buddy
Posts: 18
Joined: Tue Dec 23, 2008 4:14 pm

Yeah - that's what I thought. :D
Tried it again this morning in the 307 - perfect even thought it was snowing outside...

Hmm. Second battery in the mini?! Cheers.
User avatar
jdo330
Official CB Nut
Official CB Nut
Posts: 52
Joined: Tue Mar 11, 2008 7:59 pm
Location: Hertfordshire (but I get about a bit!)

My 98+ does the same thing and thats in the same vehicle too.

Also, sometimes when I switch it off (using the volume knob on the rig - its wired direct from the battery) the illumination goes but you can still see the channel digits (ie, 19).

Its annoying but ive learned to live with just disconnecting and re-connecting it.

ATB, Jon.
daemonchild
Good Buddy
Good Buddy
Posts: 18
Joined: Tue Dec 23, 2008 4:14 pm

I've done a couple more tests.
Even in the Pug with engine running, I get the same when there is another draw on the battery (lights, A/C etc.)
I noticed that when I have a 4 way adapter on the cigarette lighter, no joy. Without, perfect.
Hmmmmmmm.

I have another rig for the other car (still in it's box).
Will try this one.
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

dump the 4 way and wire direct to the car sorted


:D :D :D :D *King* *King*
if it anit broke dont fix it
daemonchild
Good Buddy
Good Buddy
Posts: 18
Joined: Tue Dec 23, 2008 4:14 pm

Yeah. Will do! :D
munky
Good Buddy
Good Buddy
Posts: 10
Joined: Fri Oct 03, 2008 9:37 pm

I hard wired my Maycom to the ignition live on the back of my head unit!

That way it can only come on with the ignition on, saves running your battery flat!
daemonchild
Good Buddy
Good Buddy
Posts: 18
Joined: Tue Dec 23, 2008 4:14 pm

I got the second rig out of it's box and tested it. It's perfect.
So I *think* the first one may be faulty.
I'm going to put it somewhere warm for a few days to see if there is damp inside, but if it's not fixed, I'm going to try and get a swap done.

Cheers for your help guys.
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

damp should not affect it unless you have been useing it when scuba diveing if so then you have a problem other wise damp does not affect them


:D :D :D :D *King* *King*
if it anit broke dont fix it
Road_Hog
Good Buddy
Good Buddy
Posts: 34
Joined: Fri Oct 03, 2008 6:13 am

stampman wrote:damp should not affect it unless you have been useing it when scuba diveing if so then you have a problem other wise damp does not affect them


:D :D :D :D *King* *King*

I disagree, I've left rigs in the car overnight for long periods during the winter and they do suffer on the modulation. A day or so in the airing cupboard helps cure it.
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

mine stays in the car and has done from about 1975 and never had a problem but if you use a soft top then it might be a problem damp could effect a very old mic insert but with the new condeser mics cant see it being a problem and another thing that could effect the mod is low voltage from a standing battery or bad connection on the power supply ie scotch locks


:D :D :D :D *King* *King*
if it anit broke dont fix it
extremedave
Chatter Box
Chatter Box
Posts: 226
Joined: Wed Aug 23, 2006 10:37 pm

stampman wrote:mine stays in the car and has done from about 1975
when did CB become legal again? :lol:
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

long after i got mine


:D :D :D :D *King* *King*
if it anit broke dont fix it
Post Reply