Recently fitted a President George with Sirio 4000 megawatt, swr ok 1.2 - 1.5. Ive had no problems for past month or so with tx between local and dx stations. 3 days ago parked up in Felixstowe and decided to switch from the standard mic to a Astatic road devil and my RF Xtreme 2018, both are P6 wired, one of my fellow truckers parked up next to me and I obviously asked for a mic check passing the time, everything was fine crisp, clear mod nice and loud etc
Everything was working fine, until i passed him during the day and later that evening I was parked no more than 1/4 mile from him, he stated that he could not hear any transmission from me except muffled / breaking mod and my output signal to him was around 3lb usually plus 30lb ( Radio in export mode outputs 20watts ), so i thought ok possible damage to radio changing out the mic from standard mic as supplied, as i had described earlier( George carries +12v on pin 6 ). So here's the kicker on this problem, is it his radio that has a problem or mine, reason i ask is everyone else on planet CB has no problem talking to me, plus 30lb and radio 5 etc since i spoke to him those few days ago.
cheers forzacfc
.
