Rotel RVC240 modulation problems

General CB Radio Advice and Troubleshooting

Post Reply
Satan
New to the Scene
New to the Scene
Posts: 7
Joined: Thu May 23, 2013 2:04 am

I brought my Rotel up from the garage after a 11 year stay to find it surprisingly working. Now, however I've discovered there is no modulation when the mic is keyed. Everything else seems to work fine.
I've taken the cover off to inspect the mic wiring & all seems as it should with no broken solder or dampness. Any ideas folks?
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

would suggest trying a different mic first before going in with the hammer ,chisel and jackhammer



*King* *King* *King* *King*
if it anit broke dont fix it
Satan
New to the Scene
New to the Scene
Posts: 7
Joined: Thu May 23, 2013 2:04 am

stampman wrote:would suggest trying a different mic first before going in with the hammer ,chisel and jackhammer



*King* *King* *King* *King*

Sorry I failed to mention that I did try another mic, but same thing was happening.
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

would seem to be a candidate for a spell on the workbench


*King* *King* *King* *King*
if it anit broke dont fix it
User avatar
andy@thunderpole.co.uk
Site Admin
Posts: 1142
Joined: Tue Mar 14, 2006 4:53 pm
Location: Northampton
Contact:

After a long spell in a garage dust and corrosion normally get into switches and controls, so could be clear/norm switch on the front, or the mic gain control...

Or could even be internal deviation pot.

Andy :wink:
Satan
New to the Scene
New to the Scene
Posts: 7
Joined: Thu May 23, 2013 2:04 am

Cheers guys.
Dragonfly
Motor Mouth!
Motor Mouth!
Posts: 436
Joined: Thu Oct 07, 2010 3:11 pm

Someone may have turned the internal mic adjuster off , Think the internal mic volume horseshoe is VR3 on the Cybernet board .
Image
Satan
New to the Scene
New to the Scene
Posts: 7
Joined: Thu May 23, 2013 2:04 am

Thanks again folks but I have sourced the problem. The TWO mics were to blame. I bought another 240 off eBay and the old rig works with the new mic. I'm glad of that as its a great old machine.
Post Reply