Coming back to CB radio after 40 odd years, and my brain is trying to remember stuff long forgotten. The last base setup I had was a 40 channel Cobra running through a dv27 mounted on a fire guard in the front room, and I got fantastic DX contacts from all over the world.
So, I thought you lot could help!
I have a CRE 8900 radio set up for UK CB channels ( am FM and SSB) and a Thunderpole 5. We live in a very old house, quite remote ( nearest road is 1/4 mile away, nearest neighbour, 400 metres away) in a clearing in the the middle of a wood about 50ft above sea level.
I have the Thunderpole on a 3 meter steel pole, the base of the antenna is about 5 metres above the ground and above and to the side of a large steel shed. I can't physically get it any higher at the moment due to a very steep roof and high walls, there is about 20 metres of coax feeding the antenna.
The problem I have is a very high swr, lowest is 3:1.
I have used the radio on a mag mount mobile antenna and swr is fine ( around 1.3:1 max) so I know the radio is good.
I read about RF chokes that may reduce the swr a little, so I fitted one about 16" below the base of the antenna. It consists of 8 loops of coax with 8" diameter loops.
Now the swr is around 1.1:1 and raises to about 1.5:1 at 1 MHz either side of the lowest reading.
So, my question. Is the rf choke really reducing the swr to such a low level, or am I getting a false reading?
I am not at home at the moment and I haven't tried a radio check yet ( not heard anyone local) but the set seems to pick up well, I have heard SSB and am transmissions from all over Europe and USA.
Rf choke and swr readings
I thought that too, but I have been fitting plugs on coax for years and I always check with a meter that there are no shorts, and in the case of this piece of coax and pl259's, the connections were perfect.
I suppose I could take the choke out and check again, but, that's a lot of work!
I will be home in a couple of weeks so will try to find someone to talk to, I have heard a couple of people talking on ch19 a few times and they seem pretty close, in fact, I know of one of them and he lives not too far away.
I suppose I could take the choke out and check again, but, that's a lot of work!
I will be home in a couple of weeks so will try to find someone to talk to, I have heard a couple of people talking on ch19 a few times and they seem pretty close, in fact, I know of one of them and he lives not too far away.
Is the antenna new or second hand , It should be 18ft long according to Thunderpoll specs but if someone has cut a couple of foot of the top steel whip that would put it out of tune .
http://www.thunderpole.co.uk/base-cb-an ... ole-5.html
http://www.thunderpole.co.uk/base-cb-an ... ole-5.html
It's a new Thunderpole 5 and I used the cutting chart to cut the whip at 32".
My radio has the ability to transmit from 25.615 to 30.105, so 27-28 MHz right where I want the best swr anyway.
Still don't understand why the swr is so low with the RF choke fitted though.
My radio has the ability to transmit from 25.615 to 30.105, so 27-28 MHz right where I want the best swr anyway.
Still don't understand why the swr is so low with the RF choke fitted though.
I Recon RF must be coming back down the coax outer braid causing an imballance of the ground length and the Ugly Balun will be stopping the RF coming down . I notice the Gainmaster uses a Balun as standard so they probably have the same problem without one .
Well, I managed to sort it all out and it turns out it was user error!
I just discovered that instead of my roll of RG8 mini, I used a roll of RG6.
So, I replaced it with RG8, took off the RF choke and swr is now down to between 1.1:1 to 1.3:1 and tx power is up to where it should be.
Thanks to all who helped, sorry for being so stupid!
I did say it was a long time since I used a CB radio...........
I just discovered that instead of my roll of RG8 mini, I used a roll of RG6.
So, I replaced it with RG8, took off the RF choke and swr is now down to between 1.1:1 to 1.3:1 and tx power is up to where it should be.
Thanks to all who helped, sorry for being so stupid!
I did say it was a long time since I used a CB radio...........


