silver rod
right i have just bought a venom high gain silver rod 1/2 wave and and i fixed the jubilee clips to all the black marks on all sections , i also fixed an earth wire to the ant and to a steel post in the ground , the antenna is fixed in a tree in the garden and even though i lower the bottom section im still getting a high swr any ideas thanks 
- andy@thunderpole.co.uk
- Site Admin
- Posts: 1142
- Joined: Tue Mar 14, 2006 4:53 pm
- Location: Northampton
- Contact:
If it is mounted in a tree, are the branches neat to the antenna?
The entire antenna needs to be above the any obstacles, otherwise the SWR will be high.
Andy.
The entire antenna needs to be above the any obstacles, otherwise the SWR will be high.
Andy.
Hi Andy i call it a tree but really it is a big holly bush and this time of the year not many leaves and very few branches but i think i have found the problem the rg58 coax i was using one of the pl259's was not screwing into the ant the threads were bad so i have been in touch with the supplier and they are going to send new coax with pl's plus most of the ant is above the bush anyway thanks
- andy@thunderpole.co.uk
- Site Admin
- Posts: 1142
- Joined: Tue Mar 14, 2006 4:53 pm
- Location: Northampton
- Contact:
Good stuff, hopefully that will solve the problem 
- andy@thunderpole.co.uk
- Site Admin
- Posts: 1142
- Joined: Tue Mar 14, 2006 4:53 pm
- Location: Northampton
- Contact:
There should be 4 telescopic sections that go inside the bottom section.
Andy
Andy

