Page 2 of 6
Re: Burner
Posted: Sun Mar 23, 2008 8:36 am
by jason
i noticed that swr can go up quite a bit when hooking up a linear amp , so keep an eye in it,, also i bought a kpo 45 amp power supply with amp and volt readout, with a rm kl400 amp i measured a pull of between 10 and 20 amps,
depending what extras i am running from the auxillarys ,
Re: Burner
Posted: Thu Mar 19, 2009 9:09 am
by FISH
The swr shouldnt go up a great deal.what swr are we looking at m8.
Re: Burner
Posted: Thu Mar 19, 2009 12:37 pm
by stampman
Re: Burner
Posted: Thu Mar 19, 2009 9:15 pm
by killer cam
it will rise
Re: Burner
Posted: Fri Mar 20, 2009 9:21 am
by FISH
How far has the swr gone up to m8.when running the amp.
Re: Burner
Posted: Sun Mar 22, 2009 5:35 pm
by killer cam
i would say it will go up to 3 or 5
Re: Burner
Posted: Sun Mar 22, 2009 9:15 pm
by hotmetal1000
Depends how well the swr was set at low power. The closer to 1:1 at low power it is the less it will rise with more power.
Re: Burner
Posted: Tue Mar 24, 2009 5:02 pm
by killer cam
i got mine dead on 1;1
Re: Burner
Posted: Wed Mar 25, 2009 8:28 am
by FISH
Is that 1.3 or 1.5 / or do you mean 3.0 or more
Re: Burner
Posted: Thu Mar 26, 2009 12:30 pm
by porky.69
killer cam wrote:i got mine dead on 1;1
thats the way to go lol bang on mate =D>
Re: Burner
Posted: Sun Mar 29, 2009 6:37 am
by Road_Hog
Can I just say, that if you look at the post at the top of the page that you are all replying to, it is March 2008, not March 2009.
Re: Burner
Posted: Sun Mar 29, 2009 1:26 pm
by killer cam
dont u mean to say that to fish
Re: Burner
Posted: Mon Mar 30, 2009 8:49 am
by stampman
Re: Burner
Posted: Mon Mar 30, 2009 12:15 pm
by FISH
Now thats too true stampman old days are here again recession,recession.
Re: Burner
Posted: Mon Mar 30, 2009 3:59 pm
by porky.69
