Rf choke and swr readings
Posted: Tue Mar 01, 2016 10:36 pm
Coming back to CB radio after 40 odd years, and my brain is trying to remember stuff long forgotten. The last base setup I had was a 40 channel Cobra running through a dv27 mounted on a fire guard in the front room, and I got fantastic DX contacts from all over the world.
So, I thought you lot could help!
I have a CRE 8900 radio set up for UK CB channels ( am FM and SSB) and a Thunderpole 5. We live in a very old house, quite remote ( nearest road is 1/4 mile away, nearest neighbour, 400 metres away) in a clearing in the the middle of a wood about 50ft above sea level.
I have the Thunderpole on a 3 meter steel pole, the base of the antenna is about 5 metres above the ground and above and to the side of a large steel shed. I can't physically get it any higher at the moment due to a very steep roof and high walls, there is about 20 metres of coax feeding the antenna.
The problem I have is a very high swr, lowest is 3:1.
I have used the radio on a mag mount mobile antenna and swr is fine ( around 1.3:1 max) so I know the radio is good.
I read about RF chokes that may reduce the swr a little, so I fitted one about 16" below the base of the antenna. It consists of 8 loops of coax with 8" diameter loops.
Now the swr is around 1.1:1 and raises to about 1.5:1 at 1 MHz either side of the lowest reading.
So, my question. Is the rf choke really reducing the swr to such a low level, or am I getting a false reading?
I am not at home at the moment and I haven't tried a radio check yet ( not heard anyone local) but the set seems to pick up well, I have heard SSB and am transmissions from all over Europe and USA.
So, I thought you lot could help!
I have a CRE 8900 radio set up for UK CB channels ( am FM and SSB) and a Thunderpole 5. We live in a very old house, quite remote ( nearest road is 1/4 mile away, nearest neighbour, 400 metres away) in a clearing in the the middle of a wood about 50ft above sea level.
I have the Thunderpole on a 3 meter steel pole, the base of the antenna is about 5 metres above the ground and above and to the side of a large steel shed. I can't physically get it any higher at the moment due to a very steep roof and high walls, there is about 20 metres of coax feeding the antenna.
The problem I have is a very high swr, lowest is 3:1.
I have used the radio on a mag mount mobile antenna and swr is fine ( around 1.3:1 max) so I know the radio is good.
I read about RF chokes that may reduce the swr a little, so I fitted one about 16" below the base of the antenna. It consists of 8 loops of coax with 8" diameter loops.
Now the swr is around 1.1:1 and raises to about 1.5:1 at 1 MHz either side of the lowest reading.
So, my question. Is the rf choke really reducing the swr to such a low level, or am I getting a false reading?
I am not at home at the moment and I haven't tried a radio check yet ( not heard anyone local) but the set seems to pick up well, I have heard SSB and am transmissions from all over Europe and USA.