Search found 27 matches
- Wed Nov 22, 2006 10:43 pm
- Forum: Lorry Drivers
- Topic: advice needed
- Replies: 8
- Views: 21175
Co-Phasing Aerials
A point to remember when using two aerials connect or co-phased is that you don't use 50 Ohm coax but 75 Ohm. When using this method its much better to buy a purpose made co-phase harness so you know its correct to start with. Also you need to get the aerials as close to a 1/4 wavelength apart as ...
- Sun Nov 12, 2006 7:32 pm
- Forum: Nostalgia
- Topic: These should bring back some memories!
- Replies: 36
- Views: 102278
Nostalgia!
Well from memory i owned a Harrier CBX and a Harvard Good Buddy they were both excellent rigs! Also had a Midland 4001 and a Fidelity 2001 that performed very well also.
Infact i preferred those type of rigs to the ones available today! Wish i still had them all.
I must be a CB dinosaur!!! But i ...
Infact i preferred those type of rigs to the ones available today! Wish i still had them all.
I must be a CB dinosaur!!! But i ...
- Sat Oct 14, 2006 11:51 am
- Forum: Channel 19
- Topic: pre -tuned SWR
- Replies: 1
- Views: 2310
SWR
Hi Rodgy,
Basically pre-tuned means that it tuned at the factory on the test bench with a perfect groundplane. Assuming that the mount you are using is working properly and the cab you are attaching the mount and twig to is a good and solidly grounded to the chassis you should have ne problem ...
Basically pre-tuned means that it tuned at the factory on the test bench with a perfect groundplane. Assuming that the mount you are using is working properly and the cab you are attaching the mount and twig to is a good and solidly grounded to the chassis you should have ne problem ...
- Sun Oct 08, 2006 5:58 pm
- Forum: Channel 19
- Topic: does anyone know
- Replies: 9
- Views: 5262
Truckers
In London a lot of truckers use channel 22 and 25.
19 nowadays is mostly used by wallies, keyers, music players, burpers and farters!
Whatever happened to people using channel 14 as the calling channel?
Cheers....P
19 nowadays is mostly used by wallies, keyers, music players, burpers and farters!
Whatever happened to people using channel 14 as the calling channel?
Cheers....P
- Thu Sep 28, 2006 5:07 pm
- Forum: Channel 19
- Topic: How do we save CB???
- Replies: 70
- Views: 28277
How do we save CB???
Hi All,
On another UK website a discussion is taking place regarding the future of our hobby.
There are large areas of the country where there is virtually no CB use.
Please take a look at the site 888888888888n the CB radio chat section. They do say use it or lose it and i'm not sure i know how ...
On another UK website a discussion is taking place regarding the future of our hobby.
There are large areas of the country where there is virtually no CB use.
Please take a look at the site 888888888888n the CB radio chat section. They do say use it or lose it and i'm not sure i know how ...
- Thu Sep 21, 2006 10:40 am
- Forum: CB Radios
- Topic: Intek M490
- Replies: 2
- Views: 2728
m490
Thanks, will take a look and let you know how i get on....p
- Sat Sep 16, 2006 8:05 pm
- Forum: CB Radios
- Topic: Intek M490
- Replies: 2
- Views: 2728
Intek M490
Hi All,
I have an Intek M490 and understand that its possible to expand the frequency coverage from 25 Mhz through to about 30 Mhz. I wish to do this mod and ask that if anyone has any info on how to do lt please let me know. The purpose for this is to use the radio on 10 Metres.
Cheers....P
I have an Intek M490 and understand that its possible to expand the frequency coverage from 25 Mhz through to about 30 Mhz. I wish to do this mod and ask that if anyone has any info on how to do lt please let me know. The purpose for this is to use the radio on 10 Metres.
Cheers....P
- Wed Aug 30, 2006 10:05 am
- Forum: CB Antennas
- Topic: poor reception
- Replies: 5
- Views: 4203
Coax Length
Hi Malone,
Check out: http://www.firestik.com and look at their tech help section, it should have all you wan to know there.
All the best....P
Check out: http://www.firestik.com and look at their tech help section, it should have all you wan to know there.
All the best....P
- Mon Jul 17, 2006 1:37 pm
- Forum: CB Radios
- Topic: Maycom EM 27 @ Home
- Replies: 9
- Views: 9500
CB Set-Up
Hi Stu,
You'll need to pick up a power supply which i'm sure you can get from this site. The power supply converts the 230V mains AC voltage and transforms it down to 13.8V DC. For just a rig such as the Maycom a 3 Amp supply should suffice.
Hope this helps!
All the best....P
You'll need to pick up a power supply which i'm sure you can get from this site. The power supply converts the 230V mains AC voltage and transforms it down to 13.8V DC. For just a rig such as the Maycom a 3 Amp supply should suffice.
Hope this helps!
All the best....P
DX
When the skips up like it has been lately you can make good contacts into a lot of western europe. I've had good contacts into France, Germany, Portugal and Switzerland just recently on FM mid (CEPT) so its not too bad! My Stalker 9FDX puts around 8 Watts out the back.
All the best....P
All the best....P
- Mon Jul 03, 2006 3:42 pm
- Forum: CB Radios
- Topic: Ranger AR3500 intermittant SSB problem
- Replies: 2
- Views: 2903
SSB Problem
Hi GG,
try also asking the same question on the forum at: http://www.open-channel.co.uk there are some good tech types on there.
All the best....P
try also asking the same question on the forum at: http://www.open-channel.co.uk there are some good tech types on there.
All the best....P
- Mon Jun 26, 2006 6:47 pm
- Forum: Technical Help
- Topic: boots
- Replies: 5
- Views: 4022
Burners!
Mind you we never were allowed and that never stopped anyone!!
All the best....P
All the best....P
- Sun Jun 18, 2006 8:29 pm
- Forum: Motorhome/Caravan Owners
- Topic: SWR Saga (part 2)
- Replies: 5
- Views: 23945
SWR
Matt,
The signal could be reflecting off the body and causing the high SWR. I have seen aerials mounted on metal motorhome bumpers, but as a wild guess i bet yours are plastic!! Lol. I don't suppose you want to drill holes in your vehicle but is the cab flat fronted or does it have anywhere like a ...
The signal could be reflecting off the body and causing the high SWR. I have seen aerials mounted on metal motorhome bumpers, but as a wild guess i bet yours are plastic!! Lol. I don't suppose you want to drill holes in your vehicle but is the cab flat fronted or does it have anywhere like a ...
- Fri Jun 16, 2006 12:02 pm
- Forum: Motorhome/Caravan Owners
- Topic: Use of 'Electronic ground plane' on motorhome
- Replies: 32
- Views: 89719
Groundplane!
Hi G,
Its sounds to me like the car next to the caravan may be the best bet. With the caravan being of fibreglass construction there probably won't be enough groundplane from any of the metalwork which is essential to achieve an acceptable VSWR.
Hope this helps....P
Its sounds to me like the car next to the caravan may be the best bet. With the caravan being of fibreglass construction there probably won't be enough groundplane from any of the metalwork which is essential to achieve an acceptable VSWR.
Hope this helps....P
