get in there

General Chat - one nine for a roger!
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

iv just ordered my new rig and a99
now on the a99 to adjust the swr you have two rings correct #?
M6TBR

I want to tell you my setup but you might rob me
User avatar
FISH
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1589
Joined: Mon Dec 22, 2008 3:18 pm
Location: CLEVELAND,ENGLAND

HAVE FUN. 8) 8) 8) 8)
26 TANGO MIKE 501
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

i will lol
M6TBR

I want to tell you my setup but you might rob me
oldskooldaze
Good Buddy
Good Buddy
Posts: 23
Joined: Tue May 05, 2009 3:20 pm
Location: Nr Blackpool

killer cam wrote:iv just ordered my new rig and a99
now on the a99 to adjust the swr you have two rings correct #?
They should be factory set :lol:
User avatar
disgwylfa
Chatter Box
Chatter Box
Posts: 185
Joined: Tue Mar 17, 2009 4:58 pm
CB Handle: 186-TM-555

They are factory set to MID BAND. The optimum Ch. is Ch.20 Mid Block (27.205Mhz)

If you're going to spend most of your time on UK FM (27.78125 etc) or up on the High Band (27.555 etc) you'll improve your SWR by winding the rings UP a few turns.






Cheers
. . . "Cherokee"
User avatar
mpcapri
Official CB Nut
Official CB Nut
Posts: 70
Joined: Sat Sep 20, 2008 2:18 pm
Location: Northampton

Good luck Killer Cam =D>
Let us know how it goes

Photos of Antron 99 tuning rings (mine are wound right to the top but I also have a Firestick on top #-o )

Image
Zoom Zoom Zoom
Image

Image

Mart
BEER IS FOR LIFE,NOT JUST FOR CHRISTMAS!
26-TM-1969 - Red Squirrel - Spinney Hill - mpcapri - more aliases than what's his name
oldskooldaze
Good Buddy
Good Buddy
Posts: 23
Joined: Tue May 05, 2009 3:20 pm
Location: Nr Blackpool

Mine are the same mart :shock:
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

i will lol
M6TBR

I want to tell you my setup but you might rob me
User avatar
porky.69
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 2144
Joined: Sun May 04, 2008 8:11 pm
Location: wolverhampton, uk

HI CAM THEY SHOULD BE PRE SET IVE NEVER HAD TO MESS WITH ANY OF MINE AT ALL BUT TRY YOUR SWR AND TAKE IT FROM THERE
BUT USE A GOOD STRONG TAPE FOR THE JOINTS ...GOOD LUCK MATE AND LET US KNOW HOW YOU GET ON :D *King*
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

porky what type of tape elatrical tape
M6TBR

I want to tell you my setup but you might rob me
User avatar
mpcapri
Official CB Nut
Official CB Nut
Posts: 70
Joined: Sat Sep 20, 2008 2:18 pm
Location: Northampton

oldskooldaze wrote:Mine are the same mart :shock:
Don’t know why perhaps we had the same batch, I just got a better swr when the rings are at the top (both with and without the fireup top section) UK block. Also got a standard silver rod from Thunderpole, set that up with their markings on the aerial and that was absolutely spot on =D> still got to work on the sirio 827's swr but thats a pain to work with :roll:
BEER IS FOR LIFE,NOT JUST FOR CHRISTMAS!
26-TM-1969 - Red Squirrel - Spinney Hill - mpcapri - more aliases than what's his name
User avatar
porky.69
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 2144
Joined: Sun May 04, 2008 8:11 pm
Location: wolverhampton, uk

killer cam wrote:porky what type of tape elatrical tape
hi cam well thats what i used and put it around the joints *King*
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

ok i will buy a roll tomoz
M6TBR

I want to tell you my setup but you might rob me
User avatar
marsh phantom
Motor Mouth!
Motor Mouth!
Posts: 272
Joined: Fri Oct 24, 2008 6:53 pm
CB Handle: Marsh Phantom
Location: Wales and kent

my a99 at home has a high swr still, the rings need putting up,

and the antron i use for static mobile operation the rings are at the top as i get the best swr there
Ed
Marshphantom
26-TM-1986

Radios; Magnum 257, Icom IC-706MK11G, Yaesu VX-7R
Antennas; Wilson little wil (mobile) 1/4 wave tank whip (static mobile) Antron A-99 (homebase) Antron A-99 with GP kit (the big static mobile antenna)
Scanner Yaesu VR500
User avatar
mpcapri
Official CB Nut
Official CB Nut
Posts: 70
Joined: Sat Sep 20, 2008 2:18 pm
Location: Northampton

marsh phantom wrote:my a99 at home has a high swr still, the rings need putting up,

and the antron i use for static mobile operation the rings are at the top as i get the best swr there
Just checked mine again :shock: running standard 4 watts (channel 20) and it’s 1.2
Also checked the same setup but using a standard silver rod and the needle doesn’t even lift when you key up, so presume that’s the perfect swr – push 30 watts into it, calibrate it and the needle just moves. 8-[

Mart
BEER IS FOR LIFE,NOT JUST FOR CHRISTMAS!
26-TM-1969 - Red Squirrel - Spinney Hill - mpcapri - more aliases than what's his name
Post Reply