harrier cb-x mic or equivalent ?

General CB Radio Advice and Troubleshooting

Post Reply
slimfb
Good Buddy
Good Buddy
Posts: 26
Joined: Wed Jul 20, 2011 6:31 pm

any idea how to get a replacement mic for my harrier cb-x, do i need a harrier mic or can i get something else, thanks in advance
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

any mic can be wired for it dont think you will get an original mic as they where only made it the early 80's


*King* *King* *King* *King*
if it anit broke dont fix it
slimfb
Good Buddy
Good Buddy
Posts: 26
Joined: Wed Jul 20, 2011 6:31 pm

thanks for that but .......... how ?

my cb-x seems to be functioning fine, i can receive ok, swr ok, but when i transmit, the other person can hear the mic 'click' , my power meter goes over ok , but he can't hear my voice

i think it's the 'big round thing' inside the mic that's given up the ghost.........it's got a vibration membrane & a sealed metal round unit......i'm not a techy !

so.....will any 4 pin mic work, if not, what do i need to do ? thanks again in advance for help the noobs out there #-o
User avatar
killer cam
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 1593
Joined: Tue Dec 02, 2008 6:53 pm
CB Handle: killer cam
Location: Shrewsbury

Give thunderpole a ring they can probably make one up with the correct wiring for you, wiring differs on radios
M6TBR

I want to tell you my setup but you might rob me
slimfb
Good Buddy
Good Buddy
Posts: 26
Joined: Wed Jul 20, 2011 6:31 pm

nice one....thank you
slimfb
Good Buddy
Good Buddy
Posts: 26
Joined: Wed Jul 20, 2011 6:31 pm

mic came super quick on saturday, tried it in my truck today........same prob..... :(

quess i need a new radio

i know the antenna is important, but as i drive an 8 wheel tipper, i do a bit of quarry & off roading........low trees & stuff getting in the way. does this mean i have to have a springer on top to take the punishiment or is there another way to do it to have the best antenna setup possible ?

is a springer a springer, do they vary in quality & power ?

i better do a post on the antenna forum as well
User avatar
porky.69
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 2144
Joined: Sun May 04, 2008 8:11 pm
Location: wolverhampton, uk

i dont think much of the springer antennas, thunderpole sell alot of very good mobile antennas, i like the look of the red thunder (bullwhip type) antenna with a red base :wink: *King*
User avatar
stampman
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 6090
Joined: Mon Apr 24, 2006 3:36 pm
Location: lancaster

send the harrier to andy he will sort you out the harrier is a lot better set than most modern ones so it will not be money wasted


*King* *King* *King* *King*
if it anit broke dont fix it
Dragonfly
Motor Mouth!
Motor Mouth!
Posts: 436
Joined: Thu Oct 07, 2010 3:11 pm

The PTBM134AOX board is used in quite a few radios , There is a Mic Volume adjuster inside which may have become faulty, try adjusting it , i have it here in my old 80s scribble pad as Mike gain .



Image
User avatar
porky.69
- - -> CB God <- - -
- - -> CB God <- - -
Posts: 2144
Joined: Sun May 04, 2008 8:11 pm
Location: wolverhampton, uk

stampman wrote:send the harrier to andy he will sort you out the harrier is a lot better set than most modern ones so it will not be money wasted


*King* *King* *King* *King*
very true you cant beat the old radios *King*
slimfb
Good Buddy
Good Buddy
Posts: 26
Joined: Wed Jul 20, 2011 6:31 pm

thanks, i may well just do that..........i do like the harrier *lurve*
Post Reply